16
16
Locating Parts
Position Square and Bars; through a combination of hole and slots between each other,
these bars can be mounting is about as many ways as can be imagined.
V-shape locate block: For positioning and supporting of round stock.
Clamping Parts
Fixed Clamps
Adjustable Clamp
45° Clamp
Each clamp may be interchanged with each other mounting and clamping hardware. The
clamps are also easily combined with the other components from the optional accessory
package.
Insert the post is the desired hole, adjust the height and tighten the clamp.
Lock Pin
Fast Lock Pin
The fast lock pins use balls to lock the pin into the hole. Rotate the cap clockwise to tighten and
extend the balls to lock the pin in place. Rotate the cap counter-clockwise to loosen and allow
the balls to retract for removal and repositioning.
It is recommended to hand tighten only and use the hex slot only as needed to assist in
loosening.
Ball recessed, can pull out
Ball protruding, locked
