Baileigh Industrial SBR-5220, Руководство оператора

Страница: 14 / 52

11
11
25. Be sure all equipment is properly installed and grounded according to national, state, and
local codes.
26. Keep all cords dry, free from grease and oil, and protected from sparks and hot metal.
27. Inspect power and control cables periodically. Replace if damaged or bare wires are
exposed. Bare wiring can kill! DO NOT touch live electrical components or parts.
28. DO NOT bypass or defeat any safety interlock systems.
29. Learn the function and controls of the controller, the automatic height control, the torch
power supply, and the provided software packages. Know the location of the ON - OFF
switch and the
“E”- STOP
button.
30. Keep visitors a safe distance from the work area.
WARNING:
Before operating the Baileigh Shear, Brake, Roll make sure it
is firmly bolted to a table, bench, or the floor. If it tips over on you, it could cause severe
injury or death.
WARNING:
The bending brake poses a pinching hazard.
The shear blade poses an amputation hazard.
Make sure no body part or clothing is near the specific hazard. Failure to follow this
warning could result in severed or crushed fingers.