background image

 

 

STANDARD TERMS AND CONDITIONS OF SALE 

INTERPRETATION 

1.1 

In these Conditions the following words have the following meanings: 
Word   

 

Meaning 

“Buyer” 

 

the person(s), firm or company from whom an order to supply Goods is received by the Company; 

“Buyer Materials” 

any documents or other materials and any data or other information provided by the Buyer relating to the 
Goods; 

“Company” 

Baileigh Industrial Limited, a company incorporated in England and Wales (Company Number 05672861) 
whose  registered  office  is  at  Unit  D  Swift  Point,  Swift  Valley  Industrial  Estate,  Rugby, 
West Midland, CV21 2QH 

“Company Materials” 

any documents or other materials, and any data or other information provided by the Company relating to 
the Goods; 

“Conditions” 

the standard terms and conditions of sale as set out in this document; 

“Contract” 

any contract between the Company and the Buyer for the sale and purchase of the Goods; 

“Delivery Point” 

the place where delivery of the Goods is to take place under Condition 4.1; 

“Goods” 

any goods agreed in the Contract to be supplied to the Buyer by the Company (including any part or parts 
of them). 

1.2 

In these Conditions references to any statute or statutory provision shall, unless the context otherwise requires, be construed as a 
reference  to  that  statute  or  statutory  provision  as  from  time  to  time  amended,  consolidated,  modified,  extended,  re-enacted  or 
replaced. 

1.3 

In these Conditions references to the masculine include the feminine and the neuter and to the singular include the plural and vice 
versa as the context admits or requires. 

1.4 

In these Conditions headings will not affect the construction of these Conditions. 

 

APPLICATION OF TERMS 

2.1 

Subject to any variation under Condition 2.3 the Contract will be on these Conditions to the exclusion of all other terms and conditions 
(including any terms or conditions which the Buyer purports to apply under any purchase order, confirmation of order, specification 
or other document). 

2.2 

No terms or conditions endorsed upon, delivered with or contained in the Buyer’s purchase order, confirmation of order, specification 
or other document will form part of the Contract simply as a result of such document being referred to in the Contract. 

2.3 

These Conditions apply to all the Company’s sales of Goods and any variation to these Conditions and any representations about 
the Goods shall have no effect unless expressly agreed in writing and signed the designated agent/employee of the Company. 

2.4 

The Buyer must ensure that the terms of its order and any applicable specification are complete and accurate. 

2.5 

Any  quotation  given  by  the  Company  is  an  offer  which  is  valid  for  a  period  of  30  days  only,  provided  that  the  Company  has  not 
previously withdrawn it. The offer is accepted by the Buyer and a contract is formed when the Company receives a purchase order 
for the Goods, provided that such purchase order does not purport to contract on terms other than these Conditions. 

2.6 

If the Buyer requires an order confirmation providing the date of shipment this should be clearly stated in the Buyer’s purchase order. 

 

DESCRIPTION 

3.1 

The description of the Goods shall be as set out in the Co

mpany’s quotation. 

3.2 

All drawings, descriptive matter, specifications and advertising issued by the Company on any packaging of the Goods or elsewhere 
and any descriptions or illustrations contained in the Company's catalogues or brochures are issued or published for the sole purpose 
of giving an approximate idea of the Goods described in them. They will not form part of this Contract and no warranty is given that 
the Goods will comply with or perform in accordance with any such description. 

 

DELIVERY 

4.1 

Any dates specified by the Company for delivery of the Goods are intended to be an estimate and time for delivery shall not be made 
of the essence by notice. If no dates are so specified, delivery will be within a reasonable time. 

4.2 

Subject  to  the  other  provisions  of  these  Conditions  the  Company  will  not  be  liable  for  any  loss  (including  loss  of  profit),  costs, 
damages,  charges  or  expenses  caused  directly  or  indirectly  by  any  delay  in  the  delivery  of  the  Goods  (even  if  caused  by  the 
Company’s negligence), nor will any delay entitle the Buyer to terminate or rescind the Contract unless such delay exceeds 180 
days. 

4.3 

If for any reason the Buyer will not accept delivery of any of the Goods when they are ready for delivery, or the Company is unable 
to deliver the Goods on time because the Buyer has not provided appropriate instructions, documents, licenses or authorizations: 

4.3.1 

risk in the Goods will pass to the Buyer (including for loss or damage caused by the Company’s negligence); 

4.3.2 

the Goods will be deemed to have been delivered; and 

4.3.3 

the  Company  may  store  the  Goods  until  delivery  whereupon  the  Buyer  will  be  liable  for  all  related  costs  and  expenses 
(including without limitation storage and insurance). 

4.4 

The Buyer will provide at its expense at the Delivery Point adequate and appropriate equipment and manual labour for loading the 
Goods. 

 
 
 
 

Содержание SBR-5220





















































Отзывы: