Baileigh Industrial SBR-5220, Руководство оператора, Страница: 19 / 52

16
16
INSTALLATION
IMPORTANT:
Consider the following when looking for a suitable location to place the machine:

Overall weight of the machine.

Weight of material being processed.

Sizes of material to be processed through the machine.

Space needed for auxiliary stands, work tables, or other machinery.

Clearance from walls and other obstacles.

Maintain an adequate working area around the machine for safety.

Have the work area well illuminated with proper lighting.

Keep the floor free of oil and make sure it is not slippery.

Remove scrap and waste materials regularly, and make sure the work area is free from
obstructing objects.

If long lengths of material are to be fed into the machine, make sure that they will not extend
into any aisles.

LEVELING: The machine should be sited on a level, concrete floor. Provisions for securing it
should be in position prior to placing the machine. The accuracy of any machine depends on
the precise placement of it to the mounting surface.

FLOOR: This tool distributes a large amount of weight over a small area. Make certain that
the floor is capable of supporting the weight of the machine, work stock, and the operator.
The floor should also be a level surface. If the unit wobbles or rocks once in place, be sure to
eliminate by using shims.

WORKING CLEARANCES: Take into consideration the size of the material to be
processed. Make sure that you allow enough space for you to operate the machine freely.
WARNING:
It is absolutely imperative that this machine be anchored
securely to the floor to prevent tipping.
If this machine is installed on a work bench or stand of any type, then the mounting
to the bench or stand AND the stand must be anchored in such a way as to prevent
tipping.
At full capacity, the leverage of both handles extending fully forward with each
operator pulling downward WILL cause the machine to tip if not properly anchored.