Baileigh Industrial HSP-50A, Руководство оператора

Страница: 22 / 36

20
20
Mounting the Bed Frame Winch
1. Move the hand winch (11) to the outside of the frame and attach the angle to the flatbar
member with two M10 x 20mm lg. hex bolts (02), flat washers (06), lock washers (05), and
M10 hex nuts (04). Tighten all nuts and bolts securely. Check that the winch cable does not
bind up.
SETUP AND ADJUSTMENTS
Ram Slide Adjustment
To move the ram slide laterally:
1. Loosen the four-spring loaded hex bolts.
2. Slide the assembly to a new location.
3. Re-snug the spring-loaded hex bolts enough to secure
the ram slide.