23
23
OPERATION
Moving the Bed Frame
IMPORTANT:
NEVER lift or lower the bed with tooling or material or pressure from
the ram on the bed. This will damage the machine voiding the warranty.
1. Remove all material and the two heel blocks (24) from the bed frame before moving to a
different set of holes.
2. In order to reposition the bed frame, have an assistant hold the handle of the winch to keep
the frame from falling.
3. Remove the rear circlips (13) and pull out all four bed frame pins (12).
4. Using the winch, either raise or lower the bed frame to a new position and re-insert the pins.
5. Secure with the four rear circlips (13).
6. Place the two heel blocks (24) back onto the frame. They can be used with the flat side up or
the V-block side up. Always push the pins down.
Note: The heel blocks should always be used as a pair, not individually.
CAUTION:
Always wear proper eye protection with side shields, safety
footwear, and leather gloves to protect from burrs and sharp edges.
Содержание HSP-50A
