Baileigh Industrial DP-1375VS-110, Руководство оператора

Страница: 47 / 48

45
45
Fault Probable Cause Remedy
Oversize drill. Reduce drill size.
Excessive feed. Reduce feed rate.
No cutting fluid, or wrong fluid.
Use correct cutting fluid for the
material and drill.
Table cannot be raised. Lack of lubrication. Lubricate.
No speed readout.
Speed pickup out of adjustment
or failed.
Adjust gap between speed
pickup and post spindle pulley.
If there is no readout on the
LED speed indicator after
adjusting the gap, replace the
speed pickup.
NOTES