Baileigh Industrial DG-500HD, Руководство оператора

Страница: 22 / 32

20
20
MACHINE ADJUSTMENTS
The working table can be tilted 30° towards and 45°
away from the sanding disc.
1. Loosen the knob and turn the hand wheel.
2. Use the scale on the side of the gear rack to
indicate the angle of tilt.
3. After the table is adjusted, retighten the knob.
The working table can also be raised or lowered on the
column. The entire work table and lower disc guard will
raise or lower with this adjustment.
1. Loosen the knob and adjust the table height with
the hand wheel.
2. When the desire position is achieved, retighten
knob.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.