Baileigh Industrial BS-712MS, Руководство оператора

Страница: 34 / 60

31
31
MACHINE ADJUSTMENTS
Blade Guide Adjustment
1. Disconnect saw from the power source.
2.
Loosen knobs “D” and “E”.
3. Slide the blade guide assemblies as close as
possible to the work piece without interfering with the
cut or vise.
4.
Tighten knobs “D” and “E”.
5. Reconnect the saw to the power source.
Swivel Saw Head
Angles can be cut from 0 to 45° left with the BS-712MS band
saw.
1. Unlock the rotating saw bow by turning the clamp handle
counterclockwise (ccw).
2. Rotate the saw bow to the desired angle as shown on the red
angle indicator.
3. Lock the bow by turning the clamp handle clockwise (cw).
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Always follow proper safety precautions when working on or around any machinery.
WARNING:
Do not make any adjustments
or load / unload material from the vise while the saw
is running. Failure to comply may cause serious
injury.
CAUTION:
Make sure saw bow is in a
down or horizontal position when moving or mitering,
to avoid tipping the machine.
D
E