Baier Elektrowerkzeuge BST 420, Перевод оригинального руководства пользователя

Страница: 21 / 68

| 21 |
3 Technical Characteristics
3.1 Technical specifications
Drill stand BST 420
Manufacturer Maschinenfabrik OTTO BAIER GmbH
Maximum drilling stroke Ø 750 mm
Maximum diameter drilled Ø 420 mm
Maximum usable length Ø 570 mm
Maximum motor output 3.3 kW
Maximum inclination angle 55 °
Height Ø 1060 mm
Width Ø 460 mm
Depth Ø 500 mm
Weight 19 kg
Fastening drive unit/drill on the feed slide via the
mounting plate
Yes
3.2 EU Declaration of Conformity
We confirm with sole responsibility that
these products comply with provisions of
the Directives:
2006/42/EC (Machinery Directive)
2011/65/EU (RoHS Directive)
in conjunction with the safety instructions
documented in the instruction manual and
the specified intended use.
The head of development is authorised to write the
technical documents.
These are available from:
Maschinenfabrik OTTO BAIER GmbH,
Heckenwiesen 26,
71679 Asperg
Germany
Thomas Schwab
Managing Director
Robert Pichl
Factory Manager
Asperg, 06.07.2020
3.3 Controls
1
Drill stand BST 420
1 Feed slide
2
Locking pin
3 Tube lock
4 Hexagon head screw M12x110
5 Capstan handle
6 Eccentric shaft
7 Steel baseplate
8
Hexagon head screw M12x120
9 Adjustable foot
10
Nut M12 (concealed)
11 Slot nut
12
Cheese head screw (4x)
13 Drill stand column with toothing
3.4 Intended use
The drill stand is intended for holding diamond drills
with a maximum power of 3.3 kW in conjunction
with wet diamond core drill bits and a water supply
for wet drilling or with dry diamond core drill bits in
for dry drilling mineral materials such as concrete,
reinforced concrete or masonry. The largest allow -
able diameter drilled is 420 mm. Other units, which
exceed these values, may not be used. The drill
stand can be attached to the floor and to the wall
with the help of plugs / anchors or vacuum.