Baicells Atom OD040615, Руководство пользователя

Страница: 2 / 42

2
About This Document
This document is intended for installers and subscribers setting up and operating the Baicells Atom
OD040615* Outdoor Low-Gain and High-Gain Customer Premise Equipment (CPE),
aka User Equipment
(UE). The Atom unit provides a way for users to connect to the Internet through broadband wireless access
to Long-Term Evolution (LTE) backhaul networks. The information covers how to install, configure basic
settings, monitor, and perform basic troubleshooting for the outdoor CPE. If you are using a Baicells
in door
CPE, please refer to the Atom ID0406-6.5 Indoor CPE User Manual .
*NOTE: "OD" stands for outdoor. The "04" designation stands for CAT4, "06" stands for CAT6, and “15” stands
for CAT15. These categories are related to the LTE standards requirements for user equipment. Model
numbers are shown in the product datasheets, which can be found at Baicells.com > Resources > Documents .
This document is applicable to the following Atom Outdoor CPEs:
• Atom OD04L – Outdoor CAT4 Low-Gain CPE, model EG7035L
•
Atom OD04H – Outdoor CAT4 High-Gain CPE, model EG7035E
• Atom OD06L – Outdoor CAT6/7 Low-Gain CPE, model EG7010C
• Atom OD06H – Outdoor CAT6/7 High-Gain CPE, model EG7010A
•
Atom OD06-LX – Outdoor CAT6 Low-Gain CPE, model EG8013L
• Atom OD15/OD15 EUD – Outdoor CAT15 High Gain CPE, model EG8015G
Terms used in this document or related to LTE are listed in alphabetical order and described in Acronyms
and Abbreviations , which can be found at Baicells.com > Resources > Documents .
New in This Release
The following updates have been provided in this release:
• Updates reflect changes to new software BG 1.6.20
• Updated to include applicable models
•
Updated to include CAT6-LX Outdoor CPE
• Updated to include CAT15 Outdoor High-Gain CPE
•
Updated MTU setting in section 7.7.2, step 4
• Updated the Spectrum Access System (SAS) information in section 7.8
Copyright Notice
Baicells Technologies, Inc., copyrights the information in this document. No part of this document may be
reproduced in any form or means without the prior written consent of Baicells Technologies, Inc.
Disclaimer
The information in this document is subject to change at any time without notice. For more information,
please consult with a Baicells technical engineer or the support team. Refer to the “Contact Us” section
below.