Baicells Atom OD040615, Руководство пользователя

Страница: 37 / 42

37
7.7.2 Configure Local EPC APN
In a Local EPC network setup, follow the steps below to configure an APN on a CAT4 or CAT6/7/15 CPE.
1. In the CAT4 GUI go to LTE > APN Management , and in the CAT6/7/15 GUI go to LTE > Edit APN
Profile (Figure 41).
Figure 41: APN Management / Edit APN Profile
2. Select an APN number, which is just an index to separate the different APN profiles.
3. Enable the APN profile, and give it a name.
4. In CAT4, enter the Maximum Transmission Unit (MTU) packet size that can be sent on this APN.
The range is 576-1500 bytes.
NOTE: For CAT6/7/15, the MTU setting is in the LTE > MTU menu and the range is 1280-1500 bytes.
5. In CAT4, if you want this APN profile to be the default gateway, select the Default checkbox.
6. In CAT4, you can select a protocol to use: No Specified, TR069, SNMP, SNMP+TR069 .*
7. In CAT6/7/15, for security you can enter a username and password, and set the Auth Type . The
choices for the authorization/encryption protocol are NULL, AUTO, CHAP , or PAP .
8. Click SAVE & APPLY (CAT4) or Apply (CAT6/7/15) to save the settings.