Page 10
Text Display
Preset, channel, parameter and status information is shown on the 2x 24-character text display. In most
screens the currently selected channel is displayed on the upper line and the edit parameter on the lower
line. To simplify the display and enhance security, some parameters or parameter pages are omitted when
not relevant.
Parameter Knobs
Three velocity sensitive parameter knobs are used to adjust parameters shown on the display. Up to three
parameters at a time are displayed on the screen. The parameter name is shown above the parameter value
in each of the three screen sections. The parameter knobs have a fixed association with the screen sec-
tions; the rightmost parameter knob adjusts the rightmost parameter and so on.
Output Signal / Limiter Indication
Two LEDs are provided for each output channel. These show the peak signal level relative to the limiter
threshold. The yellow LED will light when the signal is 6dB below the threshold and the red warning LED
will light when the limiter threshold is reached.
Mute Buttons and Status LEDs
Each output has a mute button and associated mute status LED. Pressing the button toggles the mute on
and off.
Note that the mute buttons do not function when the Secure mode is activated.
Secure Button (on the rear)
A momentary button is fitted behind the rear panel, between the output XLRs and the RS232 port. When
activated, this will disable all the front panel controls so they cannot affect the signal path, making the unit
secure against tampering. When in secure mode, the indicators still operate normally. Note that the commu-
nications port is still active in secure mode.
