Page 14
Pressing the edit navigation buttons gives access to the various pages of parameters available for each
channel. The currently selected page is shown in the bottom left hand corner of the display, this is omitted
on some pages where the function is obvious. The screen shows up to three (normally related) parameters
for a given part of the processing functions on a given channel.
The edit buttons allow you to scroll, in either direction, through the different processing pages for a given
Channel. When you go past the last page, you will be returned to the default page.
The channel buttons allow you to scroll, in either direction, through the input and output channels, whilst
trying to maintain the currently viewed processing block. If the channel you scroll to does not have the cur-
rently viewed processing block, the next one will be shown instead.
When the unit powers-up, the settings will be the same as those when the unit was last switched off.
Presets
The device contains a total of forty-five user and Factory Presets. The user cannot overwrite the factory
preset programs.
Preset Recall
To select an existing preset, press the Recall Button so the indicator above it illuminates. Turn parameter
knob a until the required preset number is shown on the display. Factory Presets are indicated by a box
symbol appearing after the preset number. Press the Recall Button again to activate the Preset. Pressing any
other button will cancel the operation.
Out1 Freq Width Gain
EQ1 100Hz 1.4Q 0.0dB
a
b
c
CHANNEL
EDIT
