BAFANG DP C10.UART, Руководство пользователя

Страница: 25 / 26

DISPLAY MANUAL DP C10.UART
12
• Wheel Diameter check
Speed position displays Wd, The
measurements are in inches. A wrong wheel
diameter can lead to speed anomalies. After
this setting, briefly press (< 0.3 seconds) to
enter the setting interface of speed limit.
The speed
field displays
Definition Unit
b01 Current temperature °C
b04 Total voltage V
b06 Average current A
b07 Remaining capacity Ah
b08 Full capacity Ah
b09 Relative state of charge
b10 Absolute state of charge
b11 Charge/ discharge cycle
b12 Longest period without charge h
b13 Period since last charge h
d00 Cell quantity
d01 Voltage of cell 1 V
d02 Voltage of cell 2 V
dn Voltage of cell n V
• Speed Limit Setting
When the speed field displays SPL, the
distance field displays the value of the
speed limit. Minimum speed limit is 12km/h,
maximum speed limit is 60km/h. After setting,
Briefly Press (< 0.3 seconds) to enter the
menu of battery communication.
• Battery Communication
The speed field displays b01 and the distance
field displays the speed limit. Press
(< 0.3
seconds) to cycle backward. After this setting,
press (< 0.3 seconds) to enter into the
interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only show
"- - - -".