DISPLAY MANUAL DP C10.UART
8
•
Switch between Distance Mode and Speed Mode
Briefly press
to switch between distance and speed. Single-
trip distance (TRIP km), total distance (TOTAL km) maximum
speed (MAXS km/h) ,average riding speed (AVG km/h) ,
remaining distance(RANGE) and energy consumption (C) are
displayed in successive order.(Switch mode interface as below)
• Headlight/ Display Backlight Switch
Press
for 2 seconds. The backlight of the display as well as
the headlight and taillight will be turned on. Press
again
for 2 seconds to power off the display backlight / headlight /
taillight. There are 5 levels of backlight brightness that can be
selected by the user.
(If the display is turned on in a dark environment, the display
backlight / headlight / taillight will be turned on automatically.
If the display backlight / headlight / taillight are turned off
manually, they also need to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters the walk assistance
mode, and the symbol WALK is displayed. Once the key is
released, the e-bike will exit the walk assistance mode.
