Baehr Tec S2000 Скачать руководство пользователя | Manualshive

Страница: 12 / 52

background image

Operating Manual BaehrTec S2000

Page 12/52

English– V101 – Status 07/2015

3

Before using the device for the first time

3.1

Scope of delivery

Before first use, you should check that all items have been delivered.

Items delivered:
1 x S2000 controller incl. handpiece (these are firmly connected to each other)

1 x operating instructions

1 x power cable with straight connector
Art No. 20970006

1 x Easy-Clean tool kit for BaehrTec A2000
Art No.40285

1 x Measuring can

If your delivery is incomplete, please inform us of this immediately.

Please keep the delivery box along with any packaging accessories. The
packaging was developed for this device and provides the best possible
protection during transportation. Therefore, please use the original
packaging should you send your device in for servicing. There shall be no
entitlement to guarantee for any damages that are caused due to
inadequate packaging during transportation.

3.2

What to observe before every use!

It is essential that you read this section with the utmost care!

It

contains important information on protecting yourself, others and the
device from damage!

The description used in this section BaehrTec S2000 refers both to the control device
and the handpiece.

Before use, please check whether the type of current and the mains voltage of the power
source are suitable for using the device. Information on the type of current and the mains
voltage can be found on the nameplate on the controller.

When setting up the device, ensure that it is placed on a level base, that it cannot fall down
and that the extracted air can escape easily.

Please ensure that the BaehrTec S2000 is kept well out of the reach of children.

Do not expose the device to direct heat sources (heaters, strong sunlight etc.).

Ensure that the power cable is not damaged due to squeezing, snapping
or rubbing on sharp edges. If you notice any damage to the mains cable,
please immediately stop working with your device, turn off the main switch
and immediately remove the safety plug from the safety socket. To be able
to work with the device again, please order a new power cable. To be able
to work with the device again, please order a new power cable. Only use
manufacturer approved mains cables to operate the device. If you require
a new cable, please contact the manufacturer. Operating the device using
different cables is not permitted.

«
...
10
11
12
13
14
...
»

Содержание Tec S2000





















































Отзывы:

Нет отзывов

Похожие инструкции для Tec S2000

Бренд: Gulfstream Plastics Страницы: 15

Бренд: Keller Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды