Baehr TEC A2000, Руководство пользователя

Страница: 46 / 60

BaehrTec A2000 operating instructions
Page 46/58 English – V101 - effective 10/13
5.5 Self-help in the event of malfunctions
Fault Cause Solution
Controller
not
functioning

Main switch off

Controller not connected to
the mains

Connection socket has no
power

Power cable not correctly
contacted (plugged in)

Fuse(s) not working
(see 5.5.1 Changing fuses)
 Turn on main switch

Connect the device to the
mains

Connect the device to a
functional socket

Plug device connector
correctly into the device
socket
 Check main fuses and
replace if necessary
Before checking the fuses,
it is essential that the
device is turned off and
disconnected
from the
mains.
Filter indicator
is lit up.

Handpiece is blocked

Dust bag is full

Turbine protection filter in
suction box is blocked

Filter cassette is blocked

Unscrew front panel and
clean the handpiece.
It is essential that the device is
turned off and disconnected
from the mains beforehand!

Change dust bag

Change turbine protection
filter

Change filter in cassette
Low suction
power and
the device gets
hot

Filter check ignored

Handpiece is blocked

Dust bag is full

Turbine protection filter in
suction box is blocked

Filter cassette is blocked

Exhaust is blocked

Dust bag lid is not properly
closed
Seal has slipped from the duct
on the controller or the
handpiece outlet has become
dirty or is defective

Regularly check for the
filter check display

Unscrew the front panel
and clean the handpiece.
It is essential that the device is
turned off and disconnected
from the mains beforehand!

Change dust bag

Change turbine protection
filter

Change filter in cassette

Please ensure that the
extracted air can escape
easily from the back of the
device

Properly close
the dust bag lid

Check seals and replace if
necessary. Clean the filter
box, seal groove and dust
bag lid.