Baehr TEC A2000, Руководство пользователя

Страница: 10 / 60

BaehrTec A2000 operating instructions
Page 10/58 English – V101 - effective 10/13
2.3.2 Personal and patient protection
•
Only use high-quality rotating instruments with standardised shaft (diameter 2.35
mm) from the Baehr product range.
•
When using rotating instruments please observe the operating instructions. Above
all, observe the manufacturer's information on maximum speeds, cleaning,
disinfection and sterilisation.
•
Disinfect, clean and sterilise the instruments after every use.
•
For every change of patients, only use cleaned, disinfected and sterilised
instruments in order to avoid potential transmission of illnesses to subsequent
patients.
•
Perform a surface disinfection on the handpiece after every use and before every
change of patient (ensure that no disinfectant or other liquids get into the device during
this disinfection).
•
Disinfect all parts of the device that may have come into contact with contaminating
particles after every use and before every change of patient (ensure that no
disinfectant or other liquids get into the device during this disinfection).
•
During application, operating personnel must wear eye, mouth and nose protection
and must also wear protective gloves.
•
During application, the operating personnel must ensure that neither hair nor
other loose objects such as cloths, cotton wool or the like can come into the
area of the rotating tools. A hair net must be worn where necessary.
•
The operating personnel must remember that in working with the rotating instruments,
particles may be removed which could potentially splinter. Open and untreated
wounds on the patient which are in the direct vicinity of the working area should
therefore be covered in a sterile way in order to protect them from any splintering
particles.
•
The device must be maintained and cleaned according to the instructions before and
after long pauses in use.
•
The device must only be used to operate accessory parts which are approved for the
device.
•
The national statutory provisions must be observed during use, in particular:
the currently applicable work regulations
the currently applicable accident prevention measures
To guarantee constant readiness for operation and preservation of value, the prescribed
care work and maintenance services must be performed.
The device must only be repaired using replacement parts approved by the manufacturer
and in accordance with the manufacturer’s instructions. The recommended maintenance
services (after notification, but at the latest within 24 months) and inspection and repair
work must only be performed by the manufacturer.
This device must not be modified without the permission of the manufacturer.