BaehrTec A2000 operating instructions
Page 32/58
English – V101 - effective 10/13
The indication of the memory button will only appear on the display if you
select the settings via the memory button. If you (accidentally) make
settings that are saved to a memory button, you will not be shown on the
display that these settings are already stored on a memory button.
4.8
Disconnecting/connecting the dust bag lid to the controller
Before you remove the dust bag lid from the controller or attach it again,
turn off the device at the main switch
(3)
and remove the safety plug
(58)
from the socket.
4.8.1
Disconnecting
In order to disconnect the dust bag lid from the controller, please follow these steps:
1)
Hold the dust bag lid from the handle and lift it from the controller. You will feel a slight
resistance when you lift it – this is caused by the magnetic fasteners.
4.8.2
Connecting
To attach the dust bag lid to the controller please proceed as follows:
1)
First, attach the
dust bag lid with the mounting bolts for the magnet holder to the side
on which the handpiece outlet is not located.
2)
Then attach the
dust bag lid with the mounting bolts for the magnet holder to the side
on which the handpiece outlet is located. The magnets ensure that the dust bag lid
is pulled towards the housing and thus closed.
Disconnecting Fig. 14
Содержание TEC A2000
Страница 56: ...BaehrTec A2000 operating instructions Page 56 58 English V101 effective 10 13 Notes...
Страница 57: ...BaehrTec A2000 operating instructions English V101 effective 10 13 Page 57 58 Notes...
Страница 58: ......
Страница 59: ......