Baehr TEC A2000, Руководство пользователя

Страница: 33 / 60

BaehrTec A2000 operating instructions
English – V101 - effective 10/13 Page 33/58
Connecting Fig. 15
When changing the dust bag, make sure that the dust bag does not pinch
between the controller and the dust bag lid. If this should be the case,
remove the dust bag lid once again and make sure that the dust bag is
not pinched when closing.
Before you close the dust bag lid and resume your work, always make
sure that the turbine protection filter (rectangular) is inserted and that you
have attached an undamaged dust bag correctly in the receptacle
(39) for
the dust bag (42) , so that no impurities can enter the turbine and damage
the device.
4.9 Changing the filter
We recommend changing the dust bag, as well as all filters
regularly and at least every four weeks, in order to prevent
excessive germ build-up. Think of your health!
Before we describe the process of changing the filter, we would like to give you a brief
insight into the filter system used in the BaehrTec A2000.
1
st
filter: dust bag
This filter has been proven in many suction systems to this day. It filters out the majority of
dust particles. It is affordable, not too large, and must therefore be changed more often
than a large dust bag.
This has the great advantage that you do not have a build-up
of organic dust and pathogens in your filter system for too long. The dust bag is
located in the suction chamber on the receptacle (39) for the dust bag (42).
If you need additional dust bags, you can order microfibre dust bags (Art No. 21185) like
those contained in the delivery.
2
nd
filter: turbine protection filter
This filter prevents larger parts entering the turbines (e.g. if you have forgotten to install a
dust bag). The turbine protection filter is located in the filter chamber on the grille.