Baehr TEC A2000, Руководство пользователя, Страница: 43 / 60

BaehrTec A2000 operating instructions
English – V101 - effective 10/13 Page 43/58
We have incorporated this maximum speed limit when operating using
the foot pedal for your safety. When working with the foot pedal, it is even
more important that you bear in mind the maximum permissible speed of
the instrument you are using.
Think of your safety. Therefore, set the maximum speed before you
work with the instrument and check it each time you change
instruments.
Only the original Baehr foot pedal may be used with the BaehrTec A2000.
No other foot pedals are approved for use with the BaehrTec A2000.
Therefore, never connect other foot pedals, as this may cause your
device to function incorrectly and you may put yourself and others in
danger.
Furthermore, it could cause damage to your device.
Make sure that you never spill liquids on the foot pedal or use the foot
pedal on wet surfaces. If fluids should get into the foot pedal, do not use
it under any circumstances!
Please send the foot pedal in for service.
Therefore, never connect a damp or wet foot pedal, as this may cause
your device to function incorrectly and you may put yourself and others
in danger.
Furthermore, it could cause damage to your device.
5 Service and maintenance
5.1 Safety information
Never perform cleaning work or change a filter on a device that is still
connected to the mains.
Before sending in the device, it is essential that you remove the
dust bag!
Only send in your device in an immaculate hygienic condition. Any
cleaning works will always be charged.
Due to safety regulations, you are required to carry out an individual
risk assessment for your electronic devices. On this basis you are
obliged to have your devices inspected. We recommend having
your devices inspected once a year.
Always send in your device with the original power cable.