BADU Normblock Multi 100/250, Перевод оригинального руководства по эксплуатации

Страница: 95 / 352

Maintenance
04/2019 EN 35
8.2.1 Cleaning the BADU Block Multi strainer basket
1. Switch pump off.
2. Close shut-off valves.
3. Drain the pre-filter housing (124) using the drain screw
(903.3).
4. Unscrew star handle (925).
5. Remove
lid (160).
6. Remove strainer basket (143).
7. Hose strainer basket (143) down with water.
8. Return strainer basket (143).
NOTICE
High concentration water treatment products can damage the
pump!
 Do not place water treatment products, particularly in tablet
form, into the strainer basket.
NOTICE
Tightening the lid too tight will make it difficult to re-open the lid.
 Only apply normal manual force.
9. Replace and tighten the lid (160).
10. Open the shut-off valves.
11. Fill and ventilate the pump/unit. See point 6.1.2 on page 26
8.2.2 Cleaning the BADU Block Multi acrylic lid
NOTICE
Damage to the acrylic glass surface may cause stress cracks in
the lid.
 Do not use aggressive or corrosive cleaning agents or
solvents.
 Do not use sharp tools e.g. knives scrapers, steel wool or
sponges with a rough side.
 Clean the acrylic glass lid with lukewarm water, household
washing up liquid and a soft cloth.