BADU JET Perla, Перевод оригинального руководства по эксплуатации

Страница: 80 / 268

Faults
34 EN 06|2020
7 Faults
NOTICE
It is normal for a few drops of water to escape from the
mechanical seal from time to time. This is especially true during
the break-in period.
Depending on the water quality and number of operating hours,
the mechanical seal can begin to leak.
 If water leaks constantly, have the mechanical seal replaced
by a qualified technician.
NOTICE
We recommend first informing the swimming pool contractor if
there are irregularities.
7.1 Overview
Problem: Unit cannot be switched on
Possible cause Solution
Positional switch is not
snapped into place.  Check the cover position.
Problem: Pump is switched off by the built-in or external overload
switch.
Possible cause Solution
Overload.  Check pump. See point
7.1.1 on page 36.
Media temperature too high.  Wait for the motor winding
to cool down and the
motor protection to turn
back on.
 Reduce the media
temperature.
Problem: Pump seizes.
Possible cause Solution
Mechanical seal is stuck.  Turn the motor shaft. See
point 6.1.2 on page 29.
 Clean pump and pump
parts.