Badger Meter scan micro station, Руководство пользователя

Страница: 7 / 36

3 Technical Description
3.1 Intended Use
The s::can micro::station and nano::station are designed for online monitoring of water quality parameters. The
required components (probes, sensors and operator terminal) are mounted with the required flow cells, mounting
fittings and pipework on a compact panel. The stations can be used for raw water, drinking water, tap water and
clean surface water. For waste water and water with high amount of particles a specific micro::station with larger
pipework and flow cells for waste water is available.
In all types of applications, the respective acceptable limits, which are provided in the technical specifications in
the respective s::can manuals, have to be observed. All applications falling outside of these limits, and which are
not authorised by s::can GmbH in written form, do not fall under the manufacturer’s liability.
The device must only be used for the purpose described in this manual. Use in applications not described in this
s::can manual, or modification of the device without written agreement from s::can, is not allowed. s::can is not
liable for claims following from such unauthorised use. In such a case, the risks are the sole responsibility of the
operator.
3.2 Functional Principle
All s::can stations are equipped with an inlet and outlet and designed for continuous discharge of the water
through the different flow cells. An inlet strainer will prevent particles from entering the station and a flow restrictor
ensures correct pressure and discharge. A flow detector alarms when the flow is too low. The water leaves the
station pressure-free (free atmosphere). With the help of a shut-off valve after the inlet, the flow can be completely
shut off in case of service activities.
Optional the station can be equipped with an analog pressure sensor and a seperate feed pump.
3.3 Product
The following variants of completely assembled monitoring stations as well as singel components of monitoring
stations are available. Regarding detailed information of the stations please refer to section 9 (accessories) as
well as the technical specifications located at the end of this manual. If needed, the monitoring stations can be
configured customer specific also.
Type Specification
M-100-MICRO-S Turbidity, NO
3
, TOC, DOC, pH, EC, Temp, Alarms, mounted on panel with 2 flow
cells, autobrush, flow detector and con::cube operator terminal; event detection
software included.
M-100-MICRO-M Turbidity, NO
3
, TOC, DOC, NH
4
-N, pH, Temp, Alarms, mounted on panel with 2 flow
cells, autobrush, flow detector and con::cube operator terminal; event detection
software included.
M-100-MICRO-L Turbidity, NO
3
, TOC, DOC, pH, EC, Temp, one disinfection parameter, Alarms,
mounted on panel with 2 flow cells, autobrush, flow detector, and con::cube opera -
tor terminal; event detection software included.
M-100-MICRO-XL Turbidity, NO
3
, NO
2
, TOC, DOC, pH, EC, 2 disinfection parameters, Temp., Alarms,
mounted on panel with 2 flow cells, autobrush, flow detector, and con::cube opera -
tor terminal; event detection software included.
micro::station / nano::station, 03-2023 Release
www.s-can.at
Copyright © s::can GmbH
7 / 36