Badger Meter scan micro station, Руководство пользователя

Страница: 33 / 36

9.9 Service Set
For maintenance and servicing of the clean water station a suitable service set (Part-no. F-500-SERVICE-SET) is
available, which contains all needed maintenance parts as listed below.
Push-pull fittings (2 pieces), see upper figure on the right
Push-pull fittings with 90° bend (2 pieces), see middle figure on the right
Fitting for transition thread to push-pull (2 pieces), see lower figure on the
right
Blue connection tube AD 8 mm (1 m)
Inlet strainer complete (F-45-STRAIN)
Flow restrictor (F-45-FLOW-1)
Dummy plug for flow cell sensor (1 piece)
Dummy plug for flow cell autobrush incl. connecting nut (je 2 pieces)
Safety bracket for sensor (2 pieces)
Mounting holder for flow cell
Replacement brush for autobrush spectromer probe (2 pieces) incl. screws
Replacement brush for autobrush i::scan (2 pieces) incl. screws
Set with following O-rings:
- 1 piesce 9 x 3 FKM for flow detector
- 4 pieces 28 x 2 FKM for sensors or dummy plug
- 2 pieces 44 x 3 FKM for flow cell F-446 (spectro::lyser)
- 2 pieces 33 x 2 FKM for motor autobrush F-446-M
- 2 pieces 60 x 2.5 FKM for flow cell F-45-AMMO, F-45-OXI
PTFE sealing tape 12 x 0.075 (1 piece)
Cable tie 100 x 2.5 (5 pieces)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
micro::station / nano::station, 03-2023 Release
www.s-can.at
Copyright © s::can GmbH
33 / 36