• Use the sling-rigged method to lift large sensors into a vertical position while they are still crated . Use this method to
position large sensors vertically into pipelines .
Figure 3: Sling-Rigged lifting methods
• Do not lift a sensor with a forklift by positioning the sensor body on the forks, with the flanges extending beyond the lift .
This could dent the housing or damage the internal coil assemblies .
• Never place forklift forks, rigging chains, straps, slings, hooks or other lifting devices inside or through the sensor's flow
tube to hoist the unit . This could damage the isolating liner .
Do not lift sensor with forklift
Do not lift or rig lifting devices through sensor
Figure 4: Lifting and rigging cautions
Unpacking and Inspection
Page 8
March 2022
MAG-UM-01272-EN-21
