Inputs/Outputs
Flow
Simulation
[Off]
S
Flow Simulation provides output simulation based on a percentage of the Full Scale Flow . Simulation
does not accumulate the totalizers . The range of simulation includes –100…100% of the Full Scale Flow .
The Flow Simulation Parameter lets you set the range of simulation in 10% increments .
To change the Flow Simulation, follow these steps from the
Inputs/Outputs
menu:
1 . Select
Flow Simulation
to view the
Flow Simulation
display .
2 . Click [
+
] to increment the percentage by 10, or click [
–
] to decrement the percentage by 10 .
3 . Press [
E
] to save the displayed setting and return to the
Inputs/Outputs
menu .
This function remains active after exiting the menu . Set Q on “Deactivate .” If the simulation is active, the
message “STS simulation” is displayed in measuring mode .
Clear Totals
TN
S
The bidirectional net totalizer, when reset, clears both the forward and the reverse flow totalizers (T+ and
T–) . It is reset within the menu manager or through remote communications . Clearing TN also clears the
associated rollover counter .
T+
S
The bidirectional forward flow totalizer is reset within the menu manager or through remote
communications . Clearing T+ also clears the associated rollover counter .
T–
T
–
S
The bidirectional reverse flow totalizer is reset within the menu manager or through remote
communications . Clearing T– also clears the associated rollover counter .
PS
S
The batch totalizer is reset to the configured preset amount value . It is reset within the menu manager,
remote communications or through a properly configured digital input (function = batch reset) .
Tpwroff
S
The totalizer accumulating meter time without external power is reset with the menu manager or through
remote communications .
T1
S
The unidirectional totalizer T1 is reset within the menu manager .
T2
S
The unidirectional totalizer T2 is reset within the menu manager or with digital input .
VW
S
The preset batch is reset within the menu manager or with digital input .
Using the Main Menu Programming Options
Page 45
March 2022
MAG-UM-01272-EN-21
