Operating mode functions
May 2019
LM_OGP2Adv_BA_99_0045
Page 37
7.4
Flow rate
This option allows a user to see instantaneously the rate at which fluid is flowing through the meter.
2.
Press and hold the
0.1 (FLOW RATE)
button while fluid is flowing through the meter. The flow rate appears in the bottom
right hand corner of the display.
Flow rate option
•
As long as the button is held down, the flow rate remains on the
display.
•
Releasing the button returns the display to the normal operating
screen.
NOTE:
The flow rate can only be displayed if fluid is flowing through the meter.
7.5
Error codes
The meter has one error code that may display. It provides an indication, at the meter, that there is an error in communication
between the meter and keypad.
SF0 (scale factor 0)
the scale factor setting for the meter is set to 0.000.
•
To input a valid scale factor for the meter, follow the instructions in
“chapter 9 - Change factory settings”
.
All other Error Codes
are for factory purposes only.
•
To clear the meter, press reset.
