Meter operation
May 2019
LM_OGP2Adv_BA_99_0045
Page 33
6.
METER OPERATION
NOTE:
The keypad Auto button is used to toggle between Manual Mode and Auto Batch Mode.
6.1
Manual mode
Manual mode
In the manual mode the meter operates as a free flow-dispensing
handle.
1.
Pull the trigger to begin the flow.
2.
The display shows the amount dispensed.
3.
When the desired amount has been dispensed, release the trigger
to stop the flow.
4.
Press
RESET
button
once
to reset the counter display to zero.
6.2
Auto batch mode
To enter the auto batch programming mode, press the
AUTO
button until a digit and colon appear.
This screen appears:
Auto batch program mode
The meter is now ready to select the desired batch number.
•
The ‘0’ is flashing in front of the colon. This is the batch number
icon.
•
Batch ‘0’ is for manual mode (see manual mode, above).
•
Batches ‘1’, ‘2’, ’3’, ’4’ and ’5’ are for auto batching amounts up to
99 units.
•
Different batch amounts can be stored in each option.
•
Batch ‘6’ is for batches between 1 and 999 units.
1.
Press the
TOTAL
button to cycle through the batch number icons to select the desired batch or manual mode.
2.
When the desired batch number icon appears on screen, change the batch size by pressing the
10
,
1
and
0.1
buttons.
Auto batch program mode, option 1
•
Press the
10
button to increase a batch by 10 units.
•
Press the
1
button to increase a batch by 1 unit.
•
Press the
0.1
button to increase a batch by 0.1 of a unit.
