Operating mode functions
Page 36
LM_OGP2Adv_BA_99_0045
May 2019
7.
OPERATING MODE FUNCTIONS
These functions operate the same in manual mode and auto batch mode.
7.1
Resettable / accumulated totals
1.
To see the accumulated total and the resettable total:
•
Press and hold the
TOTAL
button to see the accumulated total.
•
Continue holding the
TOTAL
button.
•
After three seconds the screen changes to the resettable total.
Resettable total
2.
"Reset total" displays the total fluid dispensed since the resettable
total was last set back to zero.
3.
Press the
RESET
button while viewing "Reset total" to set it back
to zero.
4.
Release the
TOTAL
button to return to the operating screen.
NOTE:
The accumulated total cannot be reset unless the user changes from English units to metric units or from metric to
English units (
see change factory settings, change unit of measure under 9.2
7.2
Emergency override
In case of an emergency or to interrupt a batch, the meter is equipped with an emergency override.
1.
Press the red button on the meter to activate the emergency override. The override closes the valve, immediately
stopping fluid flow.
2.
After an emergency override, batching can continue by pulling up on the trigger.
7.3
History
This option allows the user to review the previous five (5) batches dispensed with the meter.
1.
Press and hold the
10
(HISTORY)
button to view the five (5) previous batches.
History option
•
The batches are displayed on screen, one at a time; beginning
with the most recent and cycling through to the oldest.
•
The batches continue to cycle as long as the
HISTORY
button is
held down.
2.
Two (2) seconds after releasing the
HISTROY
button the display automatically returns to the normal operating screen.
NOTE:
The HISTORY cannot be erased unless the user changes from English to metric or from metric to English units (see
change factory settings under 9.1
