HMI5-TP7 Revision 0002
Network Settings
Configure the network using one of the following options:
1.
Ethernet with DHCP
: This is the default, so nothing further to do. Note that Ethernet will not
work if Wi-Fi is enabled.
To see the allocated IP address, press "Ethernet" under "Wireless & networks", and the IP
Address is shown.
2.
Ethernet with Static IP Address
:
▪
Press " Ethernet" under " Wireless & networks ".
▪
Toggle "Ethernet" to "On".
▪
Click "Static IP".
▪
Enter the desired network setting.
▪
Click "Ok".
3.
Wi-Fi with DHCP
:
▪
Press " Wi-Fi" under "Wireless & networks".
▪
Toggle "Wi-Fi" to "On".
▪
Click the chosen network and enter the Wi-Fi password.
▪
Click "Connect".
To see the allocated IP address, click the th
ree dots at the top right and on “Advanced”.
4.
Wi-Fi with Static IP Address
:
▪
Press " Wi-Fi" under "Wireless & networks".
▪
Toggle "Wi-Fi" to "On".
▪
Click the chosen network and enter the Wi-Fi password.
▪
Tick “Advanced options”.
▪
Scroll down and change “IP settings” to “Static”.
▪
Enter the desired network settings.
▪
Click "Connect".
