HMI5-TP7 Revision 0002
In-Wall Mounting Installation
The visible part of the touch panel in front of the wall measures 182mm (7.1
″
) W x 121mm
(4.8 “)
H x
15mm
(0.6”)
D. This bracket can also be used for surface mounting using the 75mm
(2.95”)
x 75mm
(2.95”)
VESA holes.
1.
Make the cut-out for the Touch Panel
▪
Make a cut-out in the wall 160mm
(6.3”)
W x 104mm
(4”)
H x 21mm
(0.82”)
D, or use the in-wall
bracket as a template.
2.
Install the mounting bracket into the cut-out
▪
Insert the mounting bracket into the wall cut-out with the flanges at the bottom.
▪
Use 4 screws (not supplied) to fix the bracket to the wall.
▪
Use the 2 supplied screws to fix the touch panel to the bracket.
System Settings
To access the system settings, use the following JavaScript method from your HMI5 user interface.
JSInterface.setOptionString("START_ACTIVITY_SETTINGS", "1");
This will launch the settings where network and other parameters can be configured. The main setting
screen will stay open for 1 minute. If you navigate to another settings screen, you must press the back
arrow to return to HMI5.
