![background image](http://html1.mh-extra.com/html/backyard-products/yardline-16549/yardline-16549_manual_3363726052.webp)
50
PARTS REQUIRED:
DORMER
x3
Pre-assembled
dormer truss
with 2 gussets
Secure truss to top plate with one 3" screw from under dormer frame and back wall top plate
(Fig. E
,
F)
.
Continue securing rafter to top plate with two 3" screws above notch
(Fig. E
,
F)
.
14
15
Rest first truss on dormer frame and back wall top plate. Align truss over back wall stud and at
13-1/2"
measurement from outside of rafter. Ensure rafter notch is tight to side wall
(Fig. D, Fig G)
.
Rest middle truss on dormer frame and back wall top plate. Align truss over back wall stud and at
37-1/2" measurement
from outside of rafter. Ensure truss notch is tight to side wall
(Fig. E, Fig F)
.
Repeat Steps 10-13 to install third truss
(Fig. D, Fig. G)
.
12
11
13
24"
(61) cm)
37-1/2"
(95,3) cm)
24"
(61) cm)
13-1/2"
(34,3) cm)
13-1/2"
(34,3) cm)
MEASUREMENT
IS TO OUTSIDE
OF RAFTER
Back wall: Align over studs.
Fig. F
Tight to wall panel
(3) 3" (7,6 cm)
Screws
Toe-screw from inside.
Toe-screw from inside.
Fig. E
(3) 3" (7,6 cm)
Screws
Tight to wall panel
BEGIN
HERE
Fig. D
3" (7,6 cm)
x18
Fig. G
DOOR
Содержание Yardline 16549
Страница 2: ...This page intentionally left blank...