OLT T&G Assembly Manual Download | Manualshive

Page: 1 / 36

background image

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

8x8 Sunshed Garden Shed

Assembly Manual

Plywood Roof - T&G Model

Page 1

Revision #7
Feburary 8, 2022

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

In the event of a missing or broken piece, simply call the Outdoor Living Today Customer
Support Line @ 1-888-658-1658 within 30 days of the delivery of your purchase. It is our
commitment to you to courier replacement parts, free of charge, within 10 business days of
this notification. Replacement parts will not be provided free of charge after the 30 day grace
period.

Reversible
Roof Lines

Thank you for purchasing
an 8x8 SunShed Garden
Shed from Outdoor Living
Today. Please take the
time to identify all the
parts prior to assembly.

Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free of
any liability for improper installation, maintenance and repair.

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the
instruction manual when building your
shed and retain the manual for future
maintenance purposes.

Roof Area: 50 sqft

1
2
3
...
»

Summary of Contents for T&G





































Reviews:

No comments

Related manuals for T&G

Brand: Oakville Pages: 45

Brand: Luoman Pages: 40

Brand: Palmako Pages: 46

Brand: Palmako Pages: 56

Brand: ABSCO SHEDS Pages: 25

Brand: ABSCO SHEDS Pages: 22

Brand: Backyard Products Pages: 99

Brand: Soulet Pages: 21

0628AXNE0503HGDD2MW-V1

Brand: Mercia Garden Products Pages: 16

Brand: Mercia Garden Products Pages: 10

DURAMAX 10 Ft WoodSide

Brand: USP Pages: 15

DURAMAX '6 Ft StoreMate-V2

Brand: USP Pages: 38

DuraMax 10 Ft x 8 Ft WoodBridge

Brand: USP Pages: 58

Brand: TMG Pages: 21

Brand: Sentry Buildings Pages: 29

Brand: Stjarna Pages: 14

Duratuf TAMAHERE

Brand: Riverlea Pages: 35

Brand: Polhus Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands