Backyard Products HEARTLAND 16985, Инструкция по сборке

Страница: 57 / 76

55
48"
(122 cm)
ROOF PANELS
PARTS REQUIRED:
x1
2
3
3/4" GAUGE
BLOCK
7/16 x 48 x 96"
(1,1 x 122 x 244 cm)
Move to the opposite end.
Using the long edge of the panel as a lever
move the panel side-to-side until the top corner
is flush to the peak (Fig. C)
and there is 3/8" measurement to the
gable trim (Fig. D) .
You may need to move your sidewall to
get the 3/8" measurement.
Secure panel using (2) 2" nails in the corners.
You must square the roof by attaching one panel fist. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury until securely fastened.
Install the 48 x 96" panel with the rough side up
(painted-grid lines side) with a 3/4" measurement on the
rafter (Fig A) and the panel flush at the peak (Fig. B) .
Secure panel using (2) 2" nails in the corners.
3/8"
(9,5 mm)
Gable
Trim
Fig. D
Fig. C
Two
Nails
3/4"
(1,9 cm)
Fig. A
Gauge
Block
Flush
at peak
Flush
at peak
Fig. B
x4
2" (5 cm)
1
BEGIN