Assembly
Phase 14
Parts needed:
• (1) WP8 - LEFT WINDOW - W101826
• (1) WP9 - RIGHT WINDOW - W101827
• (4) FR - HINGE - A100093
Phase Notes
• Assemble with hardware as shown.
Hardware needed:
• (20) CX - SCREW #4x5/8 - H100127
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
Note: It is vital that the fort
be level before and after
each phase of assembly.
WP9
WP8
WP2
CX
CX
FR
FR
NOTE: Shutter windows should have
approximately 5/8" gap around all
edges.
Step 1: Measure, mark & pre-drill
holes used to attach 'WP8' Left
Window & 'WP9' Right Window to
'WP2' right wall using 'FR' Hinges and
screws 'CX', as shown.