Assembly
Phase 6
Phase Notes
• Assemble with hardware as shown.
Parts needed:
• (1) WP4 - LEFT FRONT WALL - W101840
• (1) WP5 - RIGHT FRONT WALL - W101839
• (1) MV - METAL TIE STRAP - A100257
• (2) MT - PLASTIC WINDOW MEDIUM WHITE - A100014
Hardware needed:
• (6) MW - BOLT WH 1/4x2 - H100160
• (6) KV - WASHER LOCK EXT 6x15 - H100138
• (16) BC - SCREW PWH 8x3/4 - H100070
Step 1: Attach 'WP4' Left Front Wall to
'P1' Post Upright using hardware 'MW' &
'KV', as shown.
Step 4: Attach 'MT' Plastic Window
Medium White to 'WP4' & 'WP5' Front
Walls using screws 'BC', as shown.
Step 3: Attach 'MV' Metal Tie Strap to
'WP4' & 'WP5' Front Walls using screws
'BC', as shown.
Step 2: Attach 'WP5' Right Front Wall to
'P1' Post Upright using hardware 'MW' &
'KV', as shown.
Note: It is vital that the fort
be level before and after
each phase of assembly.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
WP4
WP5
MV
BC
BC
MT
WP1
WP3
P1
P1
P1
P1
WP2
MW
MW
MW
KV
KV
KV
