Bacharach Oxor III, Руководство по эксплуатации и техническому обслуживанию, Страница: 18 / 28

Instruction 0019-9337 14
Oxor® III
Print All Test Data
1. With the analyzer in its Run Mode, press the
HOLD
button twice
to display the Print Screen. Then press the button to display the
Print All Screen.
2. Press
ENTER
to start printing.
4.9 Clearing Saved Test Data
Clear all saved test data as follows:
Note:
If no test data has been saved, the option to clear
memory will not be available.
1. With the analyzer in its Run Mode, press the
HOLD
button twice to
display the Print Screen.
2. Press the or button to scroll to the Clear Screen, and then press
ENTER
to display the Clear All Screen.
3. Press
ENTER
again to clear memory and return to the Hold Mode,
or press
HOLD
to return to the Hold Mode without clearing memory.
4.10 Resetting the Microprocessor
If the analyzer ‘locks up’ and cannot be turned OFF, reset the microproces-
sor by removing one of the batteries for 5 seconds.