Bacharach Oxor III, Руководство по эксплуатации и техническому обслуживанию, Страница: 11 / 28

Instruction 0019-9337 7
Oxor® III
2. Press the or button until the desired temperature unit
(°F or °C) is displayed.
3. Press
ENTER
to move to the next Setup Screen, or
I/O
to exit setup.
3.4.3 Time Setup
There are two Time Setup Screens, one for hours and the other for min-
utes. Two bars appear above the segments being changed. The clock is in
a 24 hour format, but will appear as AM/PM on the printout.
.
1. Enter the Setup Mode per Section 3.4.1. If necessary, repeatedly
press
ENTER
until the fi rst Time Setup Screen is displayed—the
one with two bars over the hour digits.
2. Press the or button until the correct hour value is displayed.
3. Press
ENTER
to move the selection bars over the minute digits.
4. Press the or button until the correct minute value is displayed.
5. Press
ENTER
to move to the next Setup Screen, or
I/O
to exit setup.
3.4.4 Date Setup
There are two Date Setup Screens, each labeled “DAtE”. The fi rst screen
sets the month while the second screen sets the day.