Bacharach Oxor III, Руководство по эксплуатации и техническому обслуживанию, Страница: 16 / 28

Instruction 0019-9337 12
Oxor® III
4.7 Opening and Viewing Saved Test Data
Perform the following to open and view saved test data:
Note:
If no test data has been saved, the option to open the
memory for viewing will not be available.
1. If the analyzer is in its Run Mode, press the
HOLD
button twice to
enter the Print/Memory Menu Screens. If the analyzer is already
in its Hold Mode, press the
HOLD
button only once . The fi rst menu
item displayed is the Print Screen.
2. Press the or button until the Open Screen is displayed, and
then press
ENTER
to open the memory locations for viewing. The
number shown in the second screen represents the most recent
memory location where data was stored.
3. Press the or button to scroll to the desired memory location,
and then press
ENTER
to recall the stored data and return to the
Hold Mode. While in the Hold Mode, the recalled data can be viewed
or printed per Section 4.8.
4.8 Printing Test Data
Tip:
To avoid printing errors, it is important to select the
correct protocol per Section 3.4.6 before saving data.
Turn ON the printer. Refer to the printer’s instruction manual for detailed
operation and maintenance information.
If not already done, set the printer parameters as follows:
• Data: 8 bits • Parity: None
• Baud: 9600 • Handshaking: X-on/X-off