Bacharach 19-8104, Руководство по эксплуатации и техническому обслуживанию

Страница: 7 / 36

Instruction 19-9326 3
Monoxor III
2.0 TECHNICAL CHARACTERISTICS
CO Dsplay Range ...................... 0–2000 ppm
Accuracy ..................................... ±5% of readng or ±10 ppm,
whchever s greater*
Resoluton ................................... 1 ppm
Response Tme ........................... 90% of final value within 40 sec.
Battery Requrement ................. Four dsposable ‘AA’ Alkalne batteres
Operatng Tme .......................... Up to 18 hours contnuous (pump runnng
and backlght off)
Warm Up Tme ........................... 10 or 60 seconds (dependng on CO
channel zero setup, refer to Page 9)
Dsplay ........................................ 4 digit by 2 line, 7-segment Liquid Crystal
Dsplay
Front Panel Controls .................. Sx push button swtches
(refer to Secton 3.3)
Operatng Temperature:
Analyzer ................................. 32–104 °F (0–40 °C)
Probe ....................................... 1000 °F (538 °C) max. at 5" nserton
Humdty ..................................... 15 to 90% RH (non-condensing)
Prnter Port ................................ IrDA or HP protocol
Weght ......................................... 16 oz wth batteres
Sze .............................................. 7.5"H x 3.1"W x 2.1"D (190x79x53 mm)
* Tighter accuracy in the lower ranges, up to ±2 ppm, may be attained if a
lower range calibration gas (e.g. 100 ppm CO) is used.