BACA SYSTEMS EDGE XL, Руководство по эксплуатации

Страница: 8 / 52

8/15/2019
8
10. You may move pieces in the workspace using the following methods.
a. Drag the selected pieces using the arrow cross shown below. Rotate the selected
pieces using the arrow cross shown below.
b. Coordinates: Click either the X or Y coordinate in the upper left corner of the
screen to manually type the distance from the front left corner of the machines
table to the lower left corner of the piece.
c. Use the arrows in the lower left corner of the screen. 3 options are available. At
least one piece must be selected to use this feature. Toggle between the options
by clicking in the middle of the arrow cluster.
i. Click the arrow in the direction you wish to snap the selected piece to an
adjacent piece.
ii. Click the arrow in the direction you wish to incrementally move the
selected piece. The distance the piece is moved is defined by the
Step
distance in the pull-down menu located in the upper right corner of the
screen.