9
OPERATION
Figure A + B
• The doomoo spooky has a rechargeable light module.
• Insert the light module in the cuddly toy and close the zip well.
• Activate the light module by pressing the cuddly toy’s head.
• The light module will stay on for 10 minutes and will then go to stand-by.
• When the baby cries, the light is activated again for 10 minutes.
• Press the cuddly toy’s head again to switch off the light module.
REChARgINg ThE BATTERY
Figures C + D
• Remove the light module from the cuddly toy before recharging.
• To charge the light module’s battery, connect the cable to the product as shown in figure C. Connect
the other end of the cable to a standard USB plug or a computer USB port.
• The light module will take 2 to 2.5 hours to recharge.
• When recharging is complete, disconnect the cable from the light module and insert the module
back in the cuddly toy.
• In case of empty battery, light flashes 3 times. While battery is charging, light stays on. When battery
is full, light switches off. As shown in figure D.
Warnings!
• The light module must only be recharged with the supplied cable.
• The light module must not be recharged when still in its cover.
• The light module must always be recharged by an adult.
• Always keep the supplied cable out of the reach of small children (under 36 months) due to the risk
of strangulation. The cable is not a toy.
• The product must only be used without the cable. Only then, the product is safe for children under
36 months.ger dan 36 maanden.
CARE INSTRUCTIONS
Clean the light module with a damp cloth.
Cuddly toy washing instructions:
EInaj
Warnings!
• Do not immerse the light module in water. Do not use strong detergents.
• Disconnect the cable for recharging the battery before cleaning the product.
SPOOKY •
Instructions for use
