background image

15

10

11

Meet Your Child Seat

Meet Your Child Seat

Suitable for low birth weight and premature infants without 

restrictive medical conditions. To be used only in a rearward-

facing position until the infant's shoulders reach the shoulder 

height marker (approximately 12 months of age).
Continue to use this infant restraint until the child reaches this limit.
Infants are at risk of serious injury if they face forward too early.
No child restraint can guarantee absolute protection from 

injury in every crash. However, to ensure that your child gets 

all the protection designed into the restraint, PLEASE READ AND 

FOLLOW THESE INSTRUCTIONS EXACTLY and use only Safe-n-Sound 

recommended parts and accessories.
Carefully read all the instructions for installation in this book. If in 

doubt about the method of installation, consult Britax childcare or 

agent or a child restraint fitter or, in New Zealand, to consult the 

agent for the vehicle. 

适用于没有严格医疗条件的低出生体重婴儿和早产儿。只采用后向式安装,

直到婴儿的肩膀达到肩高标记(大约12个月的宝宝)

在儿童达到该座椅上限以前必须不断使用这一婴儿汽车座椅。 

婴儿过早乘坐前向式座椅则可能受到严重的伤害。

Phù hợp với bé sơ sinh nhẹ cân và bé sanh thiếu tháng không có tình 

trạng sức khỏe giới hạn. Chỉ được sử dụng ở vị trí hướng mặt về phía sau 

cho đến khi vai của bé cao tới vạch ghi độ cao của vai (khoảng 12 tháng 

tuổi).

Hãy tiếp tục sử dụng ghế em bé này cho đến khi em cao tới giới hạn này.

Bé sơ sinh có nguy cơ bị chấn thương nghiêm trọng nếu hướng mặt về 

phía trước quá sớm.

The baby capsule and base is installed so that the infant is facing 

rearwards. This provides best position in a crash for infants.

This baby capsule provides the ability to fit low birth weight or 

premature babies and has been tested to verify its capability.
Babies and children below 4 years old must not sit in the front seat 

of a vehicle unless allowable by the Regional Road Rules
Check your local Regional Road Rules.
Always store the instruction book in the place provided in the base 

when the baby capsule is removed.
This baby capsule is compatible with various Steelcraft,               

Safe-n-Sound and competitor strollers. For detailed compatibility 

refer to www.britax.com.au.
Britax Childcare Pty Ltd continues to provide care for your children 

when traveling in motor cars with a range of child restraints 

suitable throughout their childhood.

Содержание Baby Capsule




































Отзывы: