BabyLove Baby Capsule, Руководство пользователя

Страница: 30 / 35

58 59
Installation Of Vehicle Upper Anchor Point Installation Of Vehicle Upper Anchor Point
Adjustable top
tether strap.
45°
Front of
vehicle
Extension Straps
Length 300mm (Use Britax Safe-n-Sound part 0035 or 0291).
Length 600mm (Use Britax Safe-n-Sound part 0036 or 0290).
Available from all major child restraint retailers.
Measure distance from
restraint upper anchorage
attachment clip to the car
anchor fitting.
The shaded areas of this diagram illustrate the possible locations
of the upper anchorage point (car anchor fitting). Within each
shaded area is an upper anchorage point showing the correct
way to install the fitting. Ensure the upper anchorage point is
aligned as illustrated unless stated otherwise in the vehicle
owner’s handbook.
Consult the vehicle owner’s handbook for location of anchorage
fittings or anchorage points and the possible use of spacers.
Some vehicles may have an anchor fitting fitted by the vehicle
manufacturer. If anchorage points cannot be found refer to
car manufacturer or local child restraint fitting station or traffic
authority for optimum position of upper anchorage point and the
use of spacers.
TOP TETHER STRAP
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT
PREVENTS THE RISK OF INCORRECT FITMENT OF THE ATTACHMENT
CLIP TO THE UPPER ANCHORAGE POINT. BEFORE EACH USE OF
THE RESTRAINT ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS
CORRECTLY ENGAGED TO THE UPPER ANCHORAGE POINT AND NOT
HOOKED TO OR FITTED TO, ANY OTHER OBJECT. THIS IS ESPECIALLY
IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS,
HATCH BACKS OR VEHICLES WITHOUT A FIXED PARCEL SHELF,
SINCE THE ANCHOR POINT IS USUALLY NOT VISIBLE.
IMPORTANT:
IMPORTANT INSTALLATION NOTE:
In some vehicles the upper anchorage point in the rear vertical
panel can only be installed in one way. Please refer to vehicle
owner’s handbook or a child restraint fitting station for correct
method.