background image

46

47

Care And Maintenance

Care And Maintenance

Washing Care For Cover

•  Gentle Cold Machine Wash

•  Do Not Bleach, Soak Or Wring

•  Do Not Tumble Dry

•  Do Not Dryclean

•  Dry Flat In Shade

•  Do Not Iron

Clean Harness Buckle:

If sticky liquids such as baby formula, fruit juice, etc. get inside 

your harness buckle, it may become sluggish. An indication of 

a sluggish harness buckle is that you cannot hear a click when 

engaging the second harness tongue. To restore the harness 

buckle to good working order it needs to be cleaned as follows: 

Buckle Operation

To ensure the buckle remains operational, the inside of the 

buckle must be kept free of liquids, sand, dirt, fluff, food or similar 

substances. If the buckle is not operating or you do not hear a 

strong audible click when the second tongue is inserted then 

the buckle needs to be washed or replaced. The buckle is fully 

engaged when both tongues are inserted and a 'click' is heard. 

Contact Customer Service for assistance.

Regular Care Of This Restraint:

Please check the following items regularly to ensure the safety of 

your child.
A.  Check the condition of the harness straps, i.e. No damage or 

fraying. 

B.  Check the condition of the seat structure, i.e. No cracks or other 

forms of damage.

C.  Check the harness adjuster is operating correctly.

D.  Ensure the buckle is free of fluff, liquid or other matter that may 

enter the buckle opening. Clean the buckle if it is difficult to 

engage. See next page.

  Immediate repair is required if any of the above issues are 

observed. Contact Britax

®

 Customer Service 1300 303 330. 

E.   Regularly check the restraint components, straps and other 

fitments for correct function and condition. If faulty, cease using 

and seek repair by Britax

®

.

F.   Protect all webbing from abrasion and cutting by sharp corners 

and edges.

G.  Regularly vacuum under the seat cover to remove 

accumulated food etc. Pay particular attention to Lower 

Adjuster area as food ingress can allow webbing to slip.

Cleaning Child Seat

HARDWARE:

 Use only mild soap to clean all metal and plastic 

parts of your child’s restraint, using a damp sponge or cloth. Do 

not use chemicals or cleaning agents. Do not try to place any 

hardware into a washing machine.

STRAPS/HARNESS: 

We recommend spot cleaning straps and 

harness with a damp sponge or cloth using only cold or warm 

water. Never place any straps or harness into a washing 

machine or tumble dryer.

Содержание Baby Capsule




































Отзывы: