Baby Lock Victory BLS3, Инструкция и справочник

Страница: 35 / 56

Blanket Stitch - Decorative Stitch
Note:
The threading path for the needle thread is different in
this technique. Please refer to the Quick Reference Threading
Guide or the illustration below.
1. Insert a size 90 Top Stitch needle in left needle position as
a heavy decorative thread will be used in the needle.
2. Place the left needle thread on the far left spool pin and
bring the thread through the telescopic thread guide direc-
tly above the spool of thread. Bring the thread through the
top thread guide that is normally used for the upper looper
(3rd from the left), and down the front. Lock the machine and
thread the upper looper threading port. (See page 15-16 for
detailed looper threading instructions.)
3. Unlock the machine to expose the thread. Using your twee-
zers, pull the thread out of the tubular looper at the lower end
of the looper tube (see below illustration). Bring the thread
up to the large thread guide below the face plate and to
the left. Bring the thread up and over the take-up lever slot,
down and into the last thread guide above the left needle.
4. Use Maxi-Lock thread to thread the lower looper the same
as for normal overlock stitching.
5. Slide the subsidiary looper to the right, then rotate it to the
left in place on the upper looper.
6. Place Water-soluble stabilizer on top of the fabric, along the
edge.
7. Stitch along the edge of the fabric. (fig. A)
8. When finished stitching, pull the water-soluble stabilizer to
the edge of the fabric (fig. B). This will pull the stitching to the
edge and will look like a blanket stitch. (fig. C)
For a decorative blanket stitch, follow the suggested settings
and threading illustration below.
NEEDLES
left
size 90 Top Stitch
Needle
LENGTH
4.0
WIDTH
7.5
STITCH
SELECTOR
A
A A
B B
C C
33
2
F
A
D
E
N
O
V
E
R
L
O
C
K