Baby Lock Victory BLS3 страница 9 Скачать руководство пользователя

Страница: 9 / 56

Needles

Thread

Optional Accessories

All types of thread may be used on your Baby Lock, but 100% long-staple polyester thread,

crosswound on a cone, consistently provides the best stitch performance. Because the threads

must pass through several thread guides at high speeds, they must be of uniform thickness and

high strength with a minimum amount of linting.

Good-quality cotton or cotton-covered polyester threads sew well, though they produce more

lint, creating the need to clean the machine more frequently. They work well for overedging

and seaming, but they may be too weak or too fuzzy for the rolled edge. Poor grades of these

threads can result in frequent fraying, breaking and unbalanced stitches.

Threads of other fiber contents and weights may be used, depending on their strength and

thickness. Testing will help you determine how easily they can pass through the thread guides,

thread slots, needles and loopers. For more information. (see page 44-45)

Important Note:

For maximum performance of the Baby Lock Victory, it is recommended to

use 100% polyester-long fiber thread. Recommended brands are Maxi-Lock and Metrosene.

This thread also performs best when used with various decorative threads for serging specialty

techniques.

There are optional snap-on specialty feet available for the Victory. The optional accessories are

available at your Baby Lock retailer.

• Beading Foot

B5002-01A-C

• Blindhem Foot

B5002S02A

• Clear Foot

B5002K02A-A

• Cording / Piping Foot (3mm)

B5002-02A-C

• Cording / Piping Foot (5mm)

B5002-03A-C

• Elastic Applicator Foot

B5002S01A

• Lace Applicator Foot

B5002S05A

• Ruffling Foot

B5002S03A

• Flat Sole Foot

B5001K04A

• Teflon Foot

B5002T22A

• Trim Bin

900N

Your Baby Lock Victory serger is set up with 75/11 machine needles, which are suitable for most

medium and lightweight fabrics. For heavyweight fabrics, change to a size 90/14 needle. The

needle's semi-ball point design is suitable for knits and wovens. Some manufacturers' needles

may produce better quality stitches with your Baby Lock than others. For best results, use Organ

or Schmetz brand needles - system HAx1SP/CR, and replace them approximately every third

project. (see page 46)

Содержание Victory BLS3

























































Результаты поиска

Содержание Victory BLS3

Отзывы:

Похожие инструкции для Victory BLS3

Бренды по названию

Популярные бренды

Baby Lock Victory BLS3, Инструкция и справочник

Результаты поиска

Содержание Victory BLS3

Отзывы:

Похожие инструкции для Victory BLS3

Бренды по названию

Популярные бренды