Baby Lock Victory BLS3, Инструкция и справочник

Страница: 49 / 56

Cleaning
Replacing LED Lighting
Your Baby Lock will operate at best performance if it is kept clean at all times. The serger's cutting
action creates much more lint than you will find on conventional sewing machines.
Your serger will not need oiling for many years because the major moving parts are made from
oil-impregnated metal. However, we recommend using the cleaning brush often during garment
construction in order to keep lint off the blades, the needle bar, the feed dog mechanism and loo-
pers. Remove the blade cover and throat plate periodically to clean more thoroughly.
TO REMOVE NEEDLE PLATE PROCEED AS FOLLOW:
1. For safety reasons, unplug main power cord.
2. Raise and remove presser foot.
3. Select stitch length dial to rolled hem setting.
4. Remove needles from needle clamp.
5. Turn your handwheel until the upper looper is in the far right position.
6. Remove the needle plate. Remove front screw with screwdriver and back screw with allen
wrench. (fig. A)
7. With your right hand, first raise the needle plate in front of the blade. Pull slightly to the right, then
remove to the left.
8. Replace in reverse procedure.
9. Finally, position the needle plate so that the needles lower in the center of each hole on the
needle plate. (fig. B)
Your Baby Lock Victory is equipped with a long-life LED lighting system, which is not necessary
to change bulbs.
If LED unit requires replacement, please contact your authorized Baby Lock retailer.
A A B B
Needles Needles
47
M
A
I
N
T
E
N
A
N
C
E